Multi-Effect Distillation Boosts Pharma Water Purity Via Thermal Utilization

• Customization: Available
• Application: Biotechnology Industry, Chemical industry, Food & Beverage Factory, Food Safety, Pharmaceutical Industry
• Certification: CE, FDA, GMP, ISO
• Model NO.: MB-LDS500L/H
• Control System: Full Automatic
• Treatment Process: Chlorination, Filtration, Ozonation, Reverse Osmosis, Softening, UV Disinfection
• Feed Water: Purified Water
• Heating Source: Industrial Steam
• Separation Device: Three Stage Separation Device
• Structure Form: Double Tube Plate Design
• Insulation: Glass Fiber Needle Wire Mat
• Surface Treatment: Electric-Chemical Polishing
• Recording: Paper or Paperless
• Optional 1: 21 CFR Part 11
• Optional 2: Audit Trail
• Optional 3: Scada
• Document: Dq/Oq/Iq/Fat/Sat
• Welding: Automatic/Skilled Workers
• Transport Package: Wood Packing
• Specification: 500L
• Trademark: WEMAC
• Origin: Weifang
• HS Code: 8419409090
• Production Capacity: 500L/H
• Package Size: 265.00cm * 80.50cm * 350.00cm
• Package Gross Weight: 1600.000kg

Product Description

Product Description

Multi effect water distiller Introduction

The six effect distilled water(WFI Generation plant) manufactured by Shandong Eagle is an equipment that uses purified water as raw material and industrial steam to heat water for injection (no external cooling water is required). The produced water for injection meets the specifications of Chinese Pharmacopoeia (CP2020), the United States Pharmacopoeia (USP43) and the European Pharmacopoeia (EP10) for injection water.

Structural form: the external preheater, condenser and first effect evaporator are all of double tube sheet plate design, and the internal tube sheet expansion and external welding process are adopted to avoid cross contamination;

Separation device: with falling film evaporation, gravity separation and spiral turbulence three-stage separation, the best non condensable gas discharge point is designed to discharge non condensable gas to the maximum extent;

Material: SS316L is used for all parts in contact with raw water, water for injection and secondary pure steam;

Thermal insulation: the evaporator, preheater and condenser are insulated with aluminum silicate needle felt, which has good ductility, light weight, excellent thermal insulation and strong stability;

Surface treatment: electro-chemical polishing of internal and external surfaces, effectively ensuring the surface finish of stainless steel:

Specification

Technical Features

*Energy saving and consumption reduction: since the secondary steam of the multi effect distilled water machine is used step by step in each effect, the utilization rate of industrial steam is very high, which has obvious energy saving effect. Industrial steam consumption is 1:0.21; Raw water consumption is 1:1.08; At the same time, the six effect distilled water machine does not need external cooling water;

*Stainless steel pipe is used to stretch the elbow directly to avoid welding. For the welding of pipes and fittings, argon protected automatic welding (single-sided welding and double-sided forming process) is used as much as possible to ensure the welding quality and electrochemical polishing after welding;

*Provide endoscopy photos, solder joint drawings, pressure test and pickling passivation reports, system design documents and other verification data;

*The control system adopts HMI + PLC full-automatic control. Various communication modes can be provided. Control system permission level: at least three levels of permission can be set;

*Add SCADA online system to realize data acquisition and online monitoring and control;

*Online monitoring of conductivity, temperature, flow and other parameters. Recorder records key data;

Model	Capacity	Industrial steam consumption	Feed water consumption	cooling water somsumption	dimensions
LDS 500-5	≥500	135	550	190	2000*805*3500
LDS500-6	≥500	105	550	0	2650*805*3500

Packing & Delivery

PACKAING 

Packaging & Shipping

After Sales Service

12-month warranty period as standard, commencing upon completion of installation

*Free remote technical support is provided via video and phone communication;
*Free replacement of non-human damaged components is offered within the warranty period.

Company Profile

67years experience in pharmaceutical industry

Cutting, automated welding and other processes from raw material blanking are all completed in-house. We also have a team of highly experienced welders, and the factory is equipped with an electrochemical polishing machine, endoscope inspection equipment and other professional facilities.

FAQ

Q1:How can you come to visit our factory ?

A: You can take plan go to Qingdao Airport, Shandong. Our company will arrange a car to pick you up directly from the airport and transfer you to our factory for a visit.

Q2: What about the installation?

A: We can provide installation services. First option: we can assign our engineers to your company for commissioning and maintanice but the expenses for this trip, such as airfare,visa,accommodation, and labor costswill be borne by your side. The second option: We provideonline services.lf the equipment is still under warranty,necessary accessories and parts will be provided free ofcharge, but the shipping costs will be borne by the buyer

Q3.About FAT

We'll provide the full sets of certification documents and after the FAT completed delevery the goods.
The factory will cover all accommodation and meals for the FAT period.