Large-Volume Intravenous Water Distillation and Purification System for Pharmaceutical Applications

• Customization: Available
• Application: Pharmaceutical Industry
• Disposable: No
• Model NO.: water for injection (WFI)
• Injection Site: Subcutaneous
• Material: Glass, Plastic, Stainless Steel
• Needle Gauge: 21G
• Safety Feature: Needle Guard
• Usage: Diabetes Care, Medical, Pain Management, Vaccine Administration
• Warranty: One Year
• Feed Water: Purified Water
• Heat Source: Industrial Steam
• Conductivity Test: Yes
• Separation Device: Three Stage Separation
• Transport Package: Wood Packing
• Specification: 1540x770x3150
• Trademark: WEMAC
• Origin: Weifang
• HS Code: 8404101000
• Production Capacity: 100-6000L/H
• Package Size: 293.00cm * 100.00cm * 400.00cm
• Package Gross Weight: 2100.000kg

Product Description

Product Description

Five-column distiller

Six -column distiller

Design Principle:

Based on the technical principles of Italian STILMAS models, this machine uses purified water as feed water. After sequential preheating through a six-effect preheater, the water enters the evaporator. Inside the evaporator, it undergoes three-stage separation (falling film evaporation, gravity sedimentation, spiral turbulent flow), and the produced pure steam serves as the heat source for the next-stage evaporator. Through gradual evaporation and heat recovery, the pure steam is simultaneously cooled into water for injection (WFI).

Dual Tube-Sheet Heat Exchanger:
Effectively prevents contamination between materials and heating media.

Operation Parameters:

Uses purified water (consumption ratio: 1.08) as raw material and industrial steam (consumption ratio: 0.21) for heating to produce WFI (no external cooling water required).

Quality& Compliance:

 Key Indicators of the produced water for injection: Endotoxin ≤ 0.0625 EU/ml, TOC ≤ 20 ppb.

It meets the specifications for WFI in: Chinese Pharmacopoeia (CP2020), United States Pharmacopoeia (USP43)and European Pharmacopoeia (EP10).

The six effect distilled water(WFI Generation plant) manufactured by Shandong Eagle is an equipment that uses purified water as raw material and industrial steam to heat water for injection (no external cooling water is required). The produced water for injection meets the specifications of Chinese Pharmacopoeia (CP2020), the United States Pharmacopoeia (USP43) and the European Pharmacopoeia (EP10) for injection water.

Energy saving and consumption reduction: since the secondary steam of the multi effect distilled water machine is used step by step in each effect, the utilization rate of industrial steam is very high, which has obvious energy saving effect. Industrial steam consumption is 1:0.21; Raw water consumption is 1:1.08; At the same time, the six effect distilled water machine does not need external cooling water;

Provide endoscopy photos, solder joint drawings, pressure test and pickling passivation reports, system design documents and other verification data;

The control system adopts HMI + PLC full-automatic control. Various communication modes can be provided. Control system permission level: at least three levels of permission can be set;

Add SCADA online system to realize data acquisition and online monitoring and control;

Online monitoring of conductivity, temperature, flow and other parameters. Recorder records key data;

Specification

Item	Column	Industrial steam consumption (LPH)	Feed water consumption (LPH)	Cooling water consumption (LPH)
LDS 1000	5	250	1100	350
LDS 1000	6	210	1100	0
LDS 2000	5	520	2200	550
LDS 2000	6	440	2200	0

The convenience of multi-effect distillers is mainly reflected in the following aspects:

High Efficiency and Energy Saving
Through multi-effect evaporation and condensation technology, energy consumption is significantly reduced. Compared with traditional single-effect distillation equipment, it can save over 60% of steam consumption.
Simple Operation
Integrated with an automated control system, it supports one-click startup, real-time parameter monitoring, and fault self-diagnosis, greatly reducing manual intervention.
Compact and Integrated Design
The modular design saves installation space, flexibly adapts to different plant layouts, and centralizes maintenance interfaces for easy daily inspection and repair.
Stable Water Quality
It continuously produces high-purity distilled water with a conductivity ≤1μS/cm, meeting the strict standards of industries such as pharmaceuticals and electronics, and reducing risks caused by water quality fluctuations.
Flexible Capacity Expansion
By paralleling multiple units or adding evaporation modules, production capacity can be rapidly increased to adapt to the expansion needs of enterprises.

Conclusion: Multi-effect distillers achieve efficient, intelligent, and flexible production modes through technological innovation, providing convenient solutions for industrial production that balance economy and reliability.

Packing & Delivery

FAQ

what's the Utility requirements?

1 Feed water :Meet to PW requirements in CP2020
2 Industrial steam :Clean, dry and saturated with pressure≥0.4MPa
3 Compressed air:Clean, no water, no oil with pressure 0.6~0.8MPa
4 Power supply:3 phase 5 wire system 380VAC 50Hz 1.0kW