Wemac China Automatic Control Clean Pure Steam Generator - Professional Manufacturer

• Customization: Available
• Application: Chemical Industry, Cosmetic Industry, Food Industry, Pharmaceutical Industry
• Certification: CE, GMP, ISO
• Model NO.: CZQ1500
• Control System: Fully Automatic
• Customized: Customized
• Material: Stainless Steel
• Feed Water: Purified Water
• Heating Source: Industrial Steam
• Separation Device: Three Stage Separation Device
• Structure Form: Double Tube Plate Design
• Insulation: Glass Fiber Needle Wire Mat
• Transport Package: Wood Packing
• Specification: CZQ1500
• Trademark: WEMAC
• Origin: Weifang
• HS Code: 8419409090
• Production Capacity: 1500kg
• Package Size: 240.00cm * 150.00cm * 480.00cm
• Package Gross Weight: 1550.000kg

Product Description

Product Description

 CZQ series Pure Steam Generator Machine

WEMAC's CZQ series Pure Steam Generator is a kind of equipment that uses purified water as feed water and industrial steam heating to produce pure steam. This series of equipment can be used for sterilization and disinfection of pharmaceutical equipment and various process production lines (pipelines, storage tanks, etc.). The condensate of the pure steam produced meets the requirements of Chinese Pharmacopoeia (CP2020), U.S. Pharmacopoeia (USP43) and European Pharmacopoeia (EP10) for the specification of water for injection.

Specification

Working principle

Qualified feed water pressurized by multi-stage pumps into Condenser 2, uses the waste heat to heat feed water, and then enters the Preheater 2 and Preheater 1. After heat exchange, it enters the Evaporator and is sprayed on the inner wall of the heating tube by the feed water dispenser, so that the feed water flows in a film shape on the tube wall, and is heated and vaporized by industrial steam. The secondary steam with water droplets is generated after vaporization. From the lower end of the Evaporation chamber into the water separation device, after three stages of separation to become pure steam.

Products features

1. Structural form: Evaporator, Preheater and Condenser are all double tube plate design, adopting inner tube plate expansion outside welding process to avoid cross-contamination.

2. Separation device: Three-stage separation with falling film evaporation, gravity separation and spiral flow.

3. Material: SS316L is used for all parts in contact with feed water, pure steam and pure steam condensed water.

4. Thermal insulation: Evaporator and Preheater are insulated with aluminum silicate needled blanket, which has good extensibility, light weight, excellent thermal insulation and strong stability.

5. Surface treatment: Electrochemical polishing of internal and external surfaces, effectively ensuring the finish of the stainless steel surface.

6. Energy saving and consumption reduction: The evaporator and separator form a huge connecter, and the heat is fully utilized. The whole equipment can reach the maximum production capacity from the standby state in a very short time. The use of liquid level control feed water is fully utilized to achieve full energy saving and consumption reduction. Preheater 2 uses industrial steam condensate to preheat, and plays a role in saving energy.

7. Pipes as far as possible using stainless steel pipe stretching and bending directly to avoid welding. Pipes and fittings weldments using argon gas protection automatic welding (single-side welding double-sided molding process), to ensure the quality of welding, post-weld electrochemical polishing.

8. Provide endoscopic inspection photos, weld joint diagrams, pressure test and pickling passivation report and system design documents and other verification information.

9. The control system adopts HMl+PLC full-automatic control with easy operation interface. Various communication modes are available. Control system authority level: at least three levels of authority can be set.

10. Online monitoring of conductivity, temperature and flow rate and other parameters. Recorder can choose paperless recorder or paper recorder to record and print the key parameters.

11. The control system can be equipped with electronic signature, electronic records, so that the system control with audit trail function, and to meet the requirements of GAMP5 and meet the requirements of 21 CFR PART 11.

Specifications	Capacity(L/H)	Industrial steam consumption (L/H)	Feed water consumption (L/H)	Dimensions (mm)
CZQ1000	≥1500	1650	1650	2400*1500*4800

Packing & Delivery

Certifications

CE Certifications /FDA /GMP/ISO

UDEM
MACHINERY DIRECTIVE,
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE
ATTESTATION OF CONFORMITY

After Sales Service

video guidance

FAQ

Q1:How many years do you have in pharamceutical industry

Q2: What about the installation

A: We have 67 years of experience in pharamceutical water equipment .

We can provide installation services. First option: we can assign our engineers to your company for commissioning and maintanice but the expenses for this trip, such as airfare,visa,accommodation, and labor costswill be borne by your side. The second option: We provideonline services.lf the equipment is still under warranty,necessary accessories and parts will be provided free ofcharge, but the shipping costs will be borne by the buyer