Purified Water Systems Ideal for Laboratory and Scientific Research Scenarios

• Customization: Available
• Application: Biotechnology Industry, Chemical industry, Food & Beverage Factory, Pharmaceutical Industry
• Capacity: 1000 L/hr
• Model NO.: 1000L
• Certification: CE, FDA, GMP, ISO
• Control System: Semi-automatic
• Treatment Process: Chlorination, Electrodeionization, Filtration, Reverse Osmosis, Softening, Ultrafiltration, UV Disinfection
• Warranty of core components: One Year
• Pipe Connection: Directly Tensible Bending
• Disinfection: on Line Hot Water Disinfection
• Terminal Water Mode: Dual Supply Mode
• Middle Storage Tank: on Line Cleaning
• Transport Package: Wood Packing
• Specification: 1000L/H
• Trademark: WEMAC
• Origin: Weifang
• HS Code: 3001200010
• Production Capacity: 1000L
• Package Size: 220.00cm * 135.00cm * 320.00cm
• Package Gross Weight: 1300.000kg

Product Description

Storage Tank & Mixing tank introduction

1,Products can be designed according to customer requirements of atmospheric pressure tank or pressure vessel tank.
2,The material in contact with the medium shall be 304 or 316L stainless steel, and the other metal materials (including the frame) shall be 304 stainless steel.
3,The tank body adopts hygienic aseptic grade design, and the pipe orifice adopts smooth transition to avoid the cleaning dead angle caused by direct socket welding, and ensure the reliability and stability of the production process. The inner surface of the tank is polished by mirror (mechanical or electrolytic polishing), the roughness Ra≤0.4μm; The outer surface is treated with wire drawing, hygienic and beautiful.
4,The tanks can be cleaned online (CIP) and sterilized online (SIP) in accordance with GMP standards.
5,The temperature exchange of the medium in the tank can be realized by means of coil jacket, half-tube jacket, full jacket, etc.
6,The storage tank can be insulated. The insulation material does not contain asbestos, chlorine and other materials. The outer of the insulation layer is SS304 shell.
7,Tank interface accessories are not limited to manholes, vent filter, spray ball, diaphragm pressure gauge (pressure sensor), temperature sensor, level sensor, rupture disc.
8,The mixer of the manufacturing tank can be mechanical stir or magnetic stir, and the mixing speed can be adjusted.

Working principle

Detail desription of distribution system

The feed water enters the feed water storage tank, which is designed with a capacity of 8000L and a water consumption of 3-5 cycles in the tank to avoid the breeding of microorganisms of water in the tank. After passing through the heat exchanger (which can effectively prevent the low ro salt absorption rate caused by the low temperature in winter; at the same time, the pretreatment system can be pasteurized), the feed water enters the pretreatment system, which includes multi-media filter, activated carbon filter, softeners, The multi-media can effectively remove large particle solids, suspended solids, colloids, etc., and the SDI value can be less than 3 after being filtered by the multi-media filter; Activated carbon filter can effectively remove free chlorine in water quality, which will be less than 0.01ppm; The softener can effectively absorb calcium and magnesium ions in water, reduce water hardness and protect RO membrane. In the design, the series operation and parallel regeneration are adopted, and each softener can achieve 100% operation effect, considering both the continuity of production and the alternate operation of softeners; Then after 5μm precision filter (to protect the RO membrane from damage); The fresh water after RO1 membrane filtration enters the next stage, and the concentrated water returns to the raw water tank; After the middle water tank, it enters the RO2 through the secondary high-pressure pump. The fresh water of the secondary RO (concentrated water returns to the middle water tank) enters the EDI device for ionization. After the fresh water production is detected according to the conductivity, if it meets the requirements, it enters the purified water tank. If it does not meet the requirements, it returns to the middle water tank.

Design according to the actual needs of the customer's site and the disinfection requirements, with GMP, ISPE engineering guidelines and FDA specifications as the design concept, rational use of space, convenient use and operation, and selection of high-quality clean pipe fittings. So that the design and installation are free of dead ends and no contamination. The reflux control is reasonable and fully meets the user's requirements and verification requirements.

1. Compact installation, beautiful layout, reasonable use of space
2. Process optimization and convenient operation
3. Zero dead angle design
4. Fully automatic welding
5. Endoscopy detection.
6. Pressure test, pickling passivation treatment

Water storage system	Based on feed water quality : RO1+RO2/RO1+EDI/RO1+RO2+EDI
Brand choosing	China normal brand/China top brand/Euorpean brand

Packaging & Shipping